Correa de distribución de PU dentada STD
Correa dentada Barbieri® STD: hecha de poliuretano termoplástico, incrustada con un núcleo de alambre de acero de alta resistencia, alta calidad, alta resistencia al desgaste y puede funcionar sin problemas bajo cargas elevadas.
Se puede agregar tela de poliamida a la superficie posterior y de los dientes según sea necesario para reducir el coeficiente de fricción, reducir el ruido y mejorar el engranaje de los dientes de la correa.
STD toothed timing belt: Semi-circular arc tooth synchronous belt, also known as high-torque synchronous belt, high-precision synchronous belt, suitable for high-speed and high-torque transmission.
| Drive without reverse bending | Min. teeth No. of pulley A | 16 |
| Min. diameter of idler B | 30mm | ||
| Drive with reverse bending | Min. teeth No. of pulley C | 25 |
| Min. diameter of idler D | 60mm | ||
| * A：drive pulley，B：idler on teeth，C：drive pulley，D：idler on back | |||
| Drive without reverse bending | Min. teeth No. of pulley A | 18 |
| Min. diameter of idler B | 50mm | ||
| Drive with reverse bending | Min. teeth No. of pulley C | 30 |
| Min. diameter of idler D | 120mm | ||
| * A：drive pulley，B：idler on teeth，C：drive pulley，D：idler on back | |||
| Drive without reverse bending | Min. teeth No. of pulley A | 32 |
| Min. diameter of idler B | 140mm | ||
| Drive with reverse bending | Min. teeth No. of pulley C | 32 |
| Min. diameter of idler D | 250mm | ||
| * A：drive pulley，B：idler on teeth，C：drive pulley，D：idler on back | |||
Mechanical properties：
● Dimensional stability, low pre-tension, low axial load
● High abrasion resistance, good elasticity, maintenance-free
● Lower noise, high efficiency, high precision for line and angle location
Chemical Properties：
● Well-resistance to hydrolysis , ozone, UV and anti-aging
● Well-resistance to oil and grease
● Well corrosive resistance to most of acids and alkali
● Normal working temperature -10℃ to +60℃ (+80℃ is affordable in n a short time)
